GULVSKAP, 2200X1200X600 MCD22126R5

Material: Ramme: 1.5 mm lakkert stål. Dører: 2 mm lakkert stål. Bakside, tak og sideplater: 1.5 mm lakkert stål. Monteringsplate: 3 mm galvanisert stål. Bunnplater: 1 mm galvanisert stål. Feature: Mild steel double door combinable floor standing enclosure, with a IP 55 protection degree. Benefit: Large enclosure configurations can be created and installed in areas where there is limited access space. The enclosure's doors can support heavy loads, such as, cooling units, due to its increased loading capability. This would provide space for the enclosure doors to support heavier components or equipment such as a cooling unit. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure. Advantage: A flexible solution that allows customers to create enclosure configurations made up of smaller individual enclosures. The space required immediately in front of the enclosure is reduced due to the width of each enclosure door being half that of the enclosure. This also results in the door's loading capacity being higher, as it is split over two doors. The installed components inside the enclosure will be safe and secure due to the high protection degree. Finish: RAL 7035 strukturpulverlakk. Protection: Samsvarer med IP 55 | TYPE 12, 13 | IK 10. Comment: Mild steel side panels, SPM, need to be ordered separately, to close individual enclosures and enclosure assembly's, to ensure the stated protection degree is achieved. Mounting requirements: Standardleveranse klar for kombinert installasjon. For enkeltstående installasjon, legg til sideplater. Lock: Espangnolett 4-punkts låsesystem i hoveddøren og 2-punkts låsesystem i slavedøren. Standard DIN-lås med 3 mm innsats. Kan byttes til standard innsatser, sylindere, løftehåndtak eller T-håndtak. Bottom plates: Består av tre eller fire (D>600) stykker. Rear panel: Festes med M6 torx-skruer. Standardutstyr for montering av bakdør. Delte ryggplater for 1600 mm brede skap. Side panels: Leveres som tilbehør. Frame: Sveiseskjøtete omvendte åpne profiler med 25 mm hullmønster i henhold til DIN 43660. Inklusive integrert eksternt hullmønster. Earthing: Alle plater er jordet gjennom sin montering, og utstyrt med en separat jordingsbolt. Roof panel: Avtakbar. Doors: Monteres med fire hengsler. Inklusive dør-ramme med 25 mm hullmønster. Dørene kan ikke vendes. Separate dører må bestilles for venstrelukking.